小工具知识网

当前位置: 首页 > 行业知识 > CentOS 7升级openssh9.6p1

行业知识

CentOS 7升级openssh9.6p1

2026-11-18 20:57:57 来源:互联网转载

一、环境情况

[root@localhost ~]# cat /etc/redhat-releaseCentOS Linux release 7.9.2009 (Core)[root@localhost ~]# ssh -VOpenSSH_7.4p1, OpenSSL 1.0.2k-fips  26 Jan 2017

二、准备

1. 开启telnet

主要���在安装过程中,需要关闭老版本openssh,临时启用telnet,方便操作。其中还要临时关闭防火墙,放通telnet访问

()
[root@localhost ~]# yum install xinetd[root@localhost ~]# yum install telnet-server[root@localhost ~]# yum install telnet[root@localhost ~]# systemctl enable xinetd[root@localhost ~]# systemctl start xinetd[root@localhost ~]# systemctl  enable telnet.socket[root@localhost ~]# systemctl  start telnet.socket[root@localhost ~]# systemctl stop firewalld[root@localhost ~]# systemctl disable firewalld

 2. 安装一些包

yum -y install zlib-develyum -y install perl-Test-Simpleyum -y install pam-devel

三、安装openssl

       从openssh9.3p2开始,要求LibreSSL >= 3.1.0或OpenSSL >= 1.1.1.,不再支持老版本的

libcrypto。因此新装openssl 1.1.1。在生产环境下,已部署程序多会已使用老版本的ssl,所以新装ssl不覆盖本机上的老版本openssl,避免已有程序出错。
[root@localhost ~]# pwd/root[root@localhost ~]# tar zxvf openssl-1.1.1w.tar.gz[root@localhost ~]# cd openssl-1.1.1w[root@localhost openssl-1.1.1w]# ./config shared zlib-dynamic --prefix=/usr/local/openssl-1.1.1wOperating system: x86_64-whatever-linux2Configuring OpenSSL version 1.1.1w (0x1010117fL) for linux-x86_64Using os-specific seed configurationCreating configdata.pmCreating Makefile*************************************************************************                 ******   OpenSSL has been successfully configured                     ******                 ******   If you encounter a problem while building, please open an    ******   issue on GitHub   ******   and include the output from the following command:           ******                 ******       perl configdata.pm --dump                                ******                 ******   (If you are new to OpenSSL, you might want to consult the    ******   'Troubleshooting' section in the INSTALL file first)         ******                 *************************************************************************[root@localhost openssl-1.1.1w]# make[root@localhost openssl-1.1.1w]# make testAll tests successful.Files=159, Tests=2657, 239 wallclock secs ( 3.17 usr  0.34 sys + 170.97 cusr 59.68 csys = 234.16 CPU)Result: PASS[root@localhost openssl-1.1.1w]# make install[root@localhost openssl-1.1.1w]# echo "/usr/local/openssl-1.1.1w/lib" >> /etc/ld.so.conf[root@localhost openssl-1.1.1w]# /sbin/ldconfig -v[root@localhost openssl-1.1.1w]# cd /usr/local/openssl*[root@localhost openssl-1.1.1w]# pwd/usr/local/openssl-1.1.1w[root@localhost openssl-1.1.1w]# ./bin/openssl version -aOpenSSL 1.1.1w  11 Sep 2023built on: Sat Mar  9 02:05:16 2024 UTCplatform: linux-x86_64options:  bn(64,64) rc4(16x,int) des(int) idea(int) blowfish(ptr)compiler: gcc -fPIC -pthread -m64 -Wa,--noexecstack -Wall -O3 -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DRC4_ASM -DMD5_ASM -DAESNI_ASM -DVPAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DX25519_ASM -DPOLY1305_ASM -DZLIB -DZLIB_SHARED -DNDEBUGOPENSSLDIR: "/usr/local/openssl-1.1.1w/ssl"ENGINESDIR: "/usr/local/openssl-1.1.1w/lib/engines-1.1"Seeding source: os-specific[root@localhost openssl-1.1.1w]# 

四、安装openssh

1. 通过telnet连接服务器。关闭sshd

()
[root@localhost ~]# systemctl stop sshd[root@localhost ~]# systemctl disable sshdRemoved symlink /etc/systemd/system/multi-user.target.wants/sshd.service.

2. 安装

[root@localhost ~]# tar zxvf  openssh-9.6p1.tar.gz[root@localhost ~]# cd openssh*[root@localhost openssh-9.6p1]#./configure --prefix=/usr/local/openssh-9.6p1 --with-ssl-dir=/usr/local/openssl-1.1.1w/  --with-pam --with-zlib[root@localhost openssh-9.6p1]#make && make install[root@localhost openssh-9.6p1]# /usr/local/openssh-9.6p1/sbin/sshd -VOpenSSH_9.6p1, OpenSSL 1.1.1w  11 Sep 2023

3.配置参数

编辑启动文件sshd9.service,然后拷贝到对应目录

[root@localhost ~]# vi sshd9.service[Unit]Description=OpenSSH 9.6p1 server daemonDocumentation=man:sshd(8) man:sshd_config(5)After=network.target sshd-keygen.serviceWants=sshd-keygen.service [Service]Type=simpleEnvironmentFile=/etc/sysconfig/sshdExecStart=/usr/local/openssh-9.6p1/sbin/sshd -D $OPTIONSExecReload=/bin/kill -HUP $MAINPIDKillMode=processRestart=on-failureRestartSec=42s [Install]WantedBy=multi-user.target[root@localhost ~]# cp sshd9.service /usr/lib/systemd/system/

修改/usr/local/openssh-9.6p1/etc/sshd_config

Port 22#HostKey /usr/local/openssh-9.6p1/etc/ssh_host_rsa_key#HostKey /usr/local/openssh-9.6p1/etc/ssh_host_ecdsa_key#HostKey /usr/local/openssh-9.6p1/etc/ssh_host_ed25519_key改为HostKey /etc/ssh/ssh_host_rsa_keyHostKey /etc/ssh/ssh_host_ecdsa_keyHostKey /etc/ssh/ssh_host_ed25519_key

加固下key的权限

[root@localhost openssh-9.6p1]# chmod go-r /etc/ssh/ssh_host_ed25519_key[root@localhost openssh-9.6p1]# chmod go-r /etc/ssh/ssh_host_ecdsa_key[root@localhost openssh-9.6p1]# chmod go-r /etc/ssh/ssh_host_rsa_key

4.启动服务

[root@localhost openssh-9.6p1]# systemctl enable sshd9[root@localhost openssh-9.6p1]# systemctl start sshd9[root@localhost openssh-9.6p1]# systemctl status sshd9● sshd9.service - OpenSSH 9 server daemon   Loaded: loaded (/usr/lib/systemd/system/sshd9.service; enabled; vendor preset: disabled)   Active: active (running) since Sat 2024-03-09 00:19:44 PST; 2s ago     Docs: man:sshd(8)           man:sshd_config(5) Main PID: 11944 (sshd)    Tasks: 1   CGroup: /system.slice/sshd9.service           └─11944 sshd: /usr/local/openssh-9.6p1/sbin/sshd -D [listener] 0 of 10-100 startupsMar 09 00:19:44 localhost.localdomain systemd[1]: Started OpenSSH 9 server daemon.Mar 09 00:19:44 localhost.localdomain sshd[11944]: Server listening on 0.0.0.0 port 22.Mar 09 00:19:44 localhost.localdomain sshd[11944]: Server listening on :: port 22.[root@localhost openssh-9.6p1]#

 这时,要在命令行使用ssh,得带上路径,否则还是老版本的。

[root@localhost ~]# ssh -VOpenSSH_7.4p1, OpenSSL 1.0.2k-fips  26 Jan 2017[root@localhost ~]# /usr/local/openssh*/bin/ssh -VOpenSSH_9.6p1, OpenSSL 1.1.1w  11 Sep 2023

五、收尾

关闭telnet, 启动防火墙

上一篇:电脑服务器怎么包装?

下一篇:泰坦之旅服务器位置揭秘